软件详细介绍

Initiate cooperation

Talkpod A36plus has ultra-wide transceiver band, 1.44 inch color screen, ultra-low power consumption and other characteristics, better playability, is a very good walkie-talkie, he should not be buried, I hope that more people join the research work, together to explore more possibilities.

拓朋A36plus擁有超寬的收發頻段、1.44寸彩屏、超低功耗等特點，可玩性更好，是個非常棒的對講機，他不應該被埋沒，我希望有更多人加入研究工作，一起挖掘更多可能性。

Even Bigger warning

This modification is UNTESTED and is for RESEARCH PURPOSES ONLY, to explore the capabilities of the device and its chipset. DO NOT transmit on illegal frequencies. DO use a dummy load. The author(s) and contributor(s) of this repository are NOT liable for any damages, litigation, or other consequences of the misuse of this research firmware and do not accept any culpability. By installing any firmware from this repository, you accept full responsibility for any consequences that may arise and waive the right to pursue legal action against the author(s).

Note: Transmitting below 108MHz for more than 3 seconds will cause the power amplifier module of the device to be scrapped, this function can only be used as research, please do not use for calls.

警告： 此修改未經測試，僅用於研究目的，以探索設備及其芯片組的功能。請勿在非法頻率上傳輸。請使用假負載。本存儲庫的作者和貢獻者不對因濫用本研究固件而造成的任何損害、訴訟或其他後果承擔責任，並且不承擔任何責任。通過安裝此存儲庫中的任何固件，您對可能出現的任何後果承擔全部責任，並放棄對作者采取法律行動的權利。

提示：在108MHz以下發射超過3秒，會使設備功放模塊報廢，這個功能僅可以作為研究，請不要用於通話。

Usage method

1.Download the “bin” file, change the extension name to “hdhx”, and use the official upgrade tool to upgrade.

2.In the off state, press and hold “ PTT and 8 ”, turn on at the same time, and enter the engineering full frequency mode.

1.下載「bin」文件，將擴展名更改為「kdhx」，使用官方升級工具進行升級。

2.在關機狀態下，長按「PTT和8」，同時開機，進入工程全頻模式。

Firmware specification

The Super version is updated as follows:

Transmission frequency expansion: 18-108MHz, 136-350MHz, 390-630MHz

Receiving frequency expansion: 18-660MHz, 840-999MHz

Super版本更新如下：

發射頻率擴展： 18-108MHz，136-350MHz，390-630MHz

接收頻率擴展： 18-660MHz，840-999MHz